Kia Forte: Blower Unit Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Unit Components
| 1. Intake Seal 2. Intake Upper Case 3. Intake Actuator 4. Air Filter 5. Air Filter Cover |
6. Intake Door Assembly 7. Intake Lower Case 8. NVH Pad 9. Blower Upper Case 10. Blower Lower Case |
11. Blower Motor 12. Power Mosfet (DATC) 13. Resistor (Manual) 14. Cluster Ionizer 15. NVH Pad |
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...
See also:
Schematic Diagram
Canister
The Canister is filled with charcoal and absorbs evaporated fuel vapor
from the fuel tank. The gathered fuel vapor in canister is drawn into the intake
manifold by the ECM/PC ...
Seat Heater Switch Removal
Driver/Passenger Seat
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console assembly.
(Refer to Body - " ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Copyright © www.kifomanual.com 2014-2024