Kia Forte: Front Mud Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Mud Guard Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	After loosening the mounting clip and screws, then remove the front mud guard (A).

2.

Install in the reverse order of removal.

•	Replace any damaged clips.

Rear Wheel Guard Replacement

• Put on gloves to protect your hands. &nb ...

Rear Mud Guard Replacement

• Put on gloves to protect your hands. &nb ...

See also:

Schematic Diagrams
MDPS Circuit Diagram Harness Connector Connector Pin no Pin name Battery 1 Battery + 2 Battery - Vehicl ...

Manifold Absolute Pressure Sensor (MAPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the manifold absolute pressure sensor connecto ...

Brake Booster Vacuum Pressure Sensor Inspection
1. Check installation status of BBVPS and Vacuum hose or damage of vacuum hose. 2. Connect GDS to DLC (Data Link Cable). ...

Categories

Copyright © www.kifomanual.com 2014-2024