Kia Forte: Hood Latch Release Handle Component Location

Hood Weatherstrip Replacement

1. Remove the hood weatherstrip (A).    • ...

Hood Latch Release Handle Replacement

1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Install in the reverse order of removal. ...

See also:

Inspection
1. Check the brake warning lamp in the IGN ON position.    Brake warnin ...

Front Hub / Knuckle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Temperature Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the t ...