1. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
before beginning work.
|
2. |
Remove the roof trim assembly.
(Refer to Body - "Roof trim assembly")
|
3. |
Disconnect the curtain airbag harness connector (A).
|
4. |
After loosening the mounting bolts remove the curtain airbag.
|
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Air Ventilation Seat Unit Circuit Diagram
...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by the signal from the control unit. Pressing the intake selection switch
will shift between recirculation and ...