1. |
Remove the rear roof trim.
(Refer to Body - "Roof Trim Assembly")
|
2. |
Disconnect roof antenna connectors (A).
|
3. |
Remove the roof antenna after removing a nut (A).
|
Receiver-Drier Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with
a L wrench (A) from the condenser.
Tightening torque :
9.8~14.7N.m ( ...
ISG OFF Switch Description
The ISG OFF switch on the crash pad lower panel can be used to deactivate
the ISG function. ...
Driving your vehicle
Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change
the oil or for any other purpose. If you hear a change in the sound of the exh ...