Kia Forte: Seat Belt Switch Installation

Seat Belt Switch Removal

1. Remove the front seat. 2. After loosening the mounting bolt, then remove the front seat belt buckle (A). ...

Hood switch Description

The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety re ...

See also:

Drive plate Components
1.  Piston ring 2.  Snap ring 3.  Piston pin 4.  Piston 5.  Connecting rod 6.  Connecting rod upper bearing 7.  Connecting rod lower be ...

Variable Charge Motion Actuator (VCMA) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the VCMA connector (A). ...

Fuel Pump Removal
[LEV2] 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line ...