Kia Forte: Variable Charge Motion Actuator (VCMA) Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Charge Motion Actuator (VCMA) Components
| 1. Coupling 2. Shaft 3. Stabilizer O-ring 4. Stabilizer 5. O-ring |
6. Insert nut 7. Stabilizer Cover 8. Valve 9. Hole cover |
Variable Charge Motion Actuator (VCMA) Description
The Variable Charge Motion Actuator (VCMA) is installed on the inlet of
the intake manifold.
It consists of a DC motor which actuates the VCM valve and a position
sensor which detects th ...
Variable Charge Motion Actuator (VCMA) Specification
Motor
Item
Specification
Coil Resistance (Ω)
3.4 ~ 4.4 [20°C(68°F)]
Position sensor
Item
Specification
Coil Resis ...
See also:
Shift Cable Adjustment
1.
Place the shift lever in the interior, and the transmission manual
control lever, to the N position.
2.
Connect the shift lever (B) in ...
Immobilizer Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel" ...
Inpection
1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance - 10.0 kΩ ± 10% (25°C)
B.
H ...
Copyright © www.kifomanual.com 2014-2024