(4Door, 2Door) |
1. |
After loosening the trunk lid hinge (A) mounting bolt, adjust
the trunk lid by moving it up or down, or right or left.
|
2. |
Adjust the trunk lid height by turning the trunk lid overslam
bumpers (B).
|
3. |
After loosening the trunk lid striker (C) mounting bolts, adjust
the trunk lid striker by moving it up or down, or right or left.
|
Evaporator Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect evaporator temperature sensor.
3.
Using the multi-tester, measur ...
TPMS Receiver
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
IMS Power Seat Control Installation
-
Make sure that the IMS control switch connectors and related
connectors are plugged in ...