(5Door) |
1. |
After loosening the tail gate hinge (A) mounting bolt, adjust
the tail gate by moving it up or down, or right or left.
|
2. |
Adjust the tail gate height by turning the tail gate overslam
bumpers (B).
|
3. |
After loosening the tail gate striker (C) mounting bolts, adjust
the tail gate striker by moving it up or down, or right or left.
|
Troubleshooting
Symptom
Suspect area
Engine will not start or hard to start
Vapor hose damaged or disconnected
Engine hard to start
Malfunction of the Purge C ...
Knock Sensor (KS) Circuit Diagram
(M/T)
(A/T)
...
Audio Remote Control Inspection
1.
Check for resistance between terminals in each switch position.
[Audio (LH)]
Switch
Connector
terminal
Resista ...