1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
2. |
Remove the cushion blower (A) after loosening the mounting screws
(3EA) and disconnecting the blower connector.
|
1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
2. |
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover")
|
3. |
Remove the back blower (A) after loosening the mounting screws
(2EA) and disconnecting the blower connector.
|
1. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
|
2. |
Remove the air ventilation unit (A) after loosening the mounting
screws (2EA) and disconnecting the connector.
[Driver]
[Passenger]
|
Knock Sensor (KS) Description
Knocking is a phenomenon characterized by undesirable vibration and noise
and can cause engine damage. Knock Sensor (KS) is installed on the cylinder
block and senses engine knocking.
Whe ...
Components
1. Timing chain cover
2. Inner roter
3. Outer roter
4. Oil pump cover
5. Relief plunger
6. Relief spring
7. Relief plug
8. O-ring (suction side)
9. O-ring (disch ...
Accelerator Position Sensor (APS) Circuit Diagram
(M/T)
(A/T)
...