Kia Forte: Auto Head Lamp Leveling Unit Description

According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from glare, aiming at safety driving.

Sensor integrated ECU mounting on the rear center arm drives the actuator mounting on the head lamp since sensing the input signal following the vehicle's statically changes.

Head lamp beam is automatically operated by chassis tilt.

Auto Head Lamp Leveling Unit Circuit Diagram

...

Auto Head Lamp Leveling Unit Operation

Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. 3. ...

See also:

Variable Charge Motion Actuator (VCMA) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the VCMA connector (A). ...

Purge Control Solenoid Valve (PCSV) Installation
   • Install the component with the specified torques. • ...

Oil Pump Components
1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10. Bo ...