Kia Forte: Checking the washer fluid level - Washer fluid - Maintenance - Kia Forte TD 2014-2018 Owners ManualKia Forte: Checking the washer fluid level

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Owners Manual / Maintenance / Washer fluid / Checking the washer fluid level

Check the fluid level in the washer fluid reservoir and add fluid if necessary.


Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available.

However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING - Windshield fluid

Do not drink the windshield washer fluid. The windshield washer fluid is poisonous to humans and animals.

WARNING - Flammable fluid

Do not allow the washer fluid to come in contact with open flames or sparks. The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

Washer fluid
...

Parking brake
...

See also:

ETC (Electronic Throttle Control) System Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the resonator and the air intake hose (Refer to “I ...

Heated Steering wheel
Heated pads to grip the steering grip makes the fever. 1. Heated control unit 2. Heated pad Specifications ...

Power Seat Control Switch Installation
1. Connect the connector and install the power seat control switch. 2. Install the seat cover. ...

Copyright © www.kifomanual.com 2014-2024