Kia Forte: Control Cable Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Cable Inspection
| 1. |
Check the select cable for proper operation and for damage.
|
| 2. |
Check the shift cable for proper operation and for damage.
|
| 3. |
Check the boots for damage.
|
| 4. |
Check the boots for wear abrasion sticking, restricted movement
or damage.
|
Control Cable Components
1. Shift lever knob
2. Shift lever assembly
3. Shift cable assembly
4. Select cable assembly
5. Retainer
...
Control Cable Removal
1.
Remove the floor console assembly.
(Refer to Body - " Floor Console")
2.
Remove the select cable (B) by removing the snap ...
See also:
Components
(4Door, 5Door)
1. Front pillar trim
2. Center pillar lower trim
3. Center pillar upper trim
4. Rear pillar trim
5. Rear wheel house trim
6. Cowl side trim
...
Purge Control Solenoid Valve (PCSV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV termi ...
Intake Air Temperature Sensor (IATS) Specification
Temperature [°C(°F)]
Resistance (kΩ)
-40(-40)
40.93 ~ 48.35
-20(-4)
13.89 ~ 16.03
0(32)
5.38 ~ 6.09
10(50 ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026