• |
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
|
• |
Function
|
1. |
Clutch operation is detected through clutch switch signal. This
signal enables ECM to cope with instant change of load condition.
|
2. |
Clutch switch signal is used to detect engaged gear with vehicle
speed and engine speed.
|
Rear Seat Assembly Replacement
[Rear seat cushion assembly]
1.
Disconnect the rear seat cushion heater connector (A) from the
trunk inner side.
2.
After loosening th ...
Inspection
W/Harness Inspection
1.
Check the vehicle speed sensor by using the scan tool.
(if normal, current vehicle speed is display)
2.
Chec ...
Installation
1.
Install in the reverse order of removal.
2.
Tighten the vacuum pump mounting bolts to the specified torque.
...