1. |
Loosen the screw (A-3ea) and then remove the lower cover (B) from
the steering wheel body.
|
2. |
Remove the garnish (A).
|
3. |
Remove the wiring (A).
|
4. |
Loosen the screw (A-6ea) and then remote control switch assembly
(B) from the garnish.
|
5. |
Installation is the reverse of the removal.
|
Special driving conditions
Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud,
sand, or similar hazards, follow these suggestions:
Drive cautiously and allow extra ...
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Rear Seat Back Cover Component Location
(4Door, 2Door)
1. Rear seat back cover [LH]
2. Rear seat back cover [RH]
(5Door)
1. Rear seat back assembly [LH]
2. Rear seat ...