Kia Forte: Engine Room Under Cover Components

Engine Cover Removal and Installation

1. Remove the engine cover (A).    • ...

Engine Room Under Cover Removal and Installation

1. Remove the under cover front panel (A). 2. Remove the under covers (B). Tightening torque: 3.9 ~ 5.9 N ...

See also:

Manifold Absolute Pressure Sensor (MAPS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Conditio ...

Injector Specification
Item Specification Coil Resistance (Ω) 13.8 ~ 15.2 [20°C(68°F)] ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...