Kia Forte: Evaporative Emission Control System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System
- Description
- Operation
- Schematic Diagram
- Components Location
- Inspection
- Canister Removal
- Canister Inspection
- Canister Installation
- On-board Refueling Vapor Recovery (ORVR) valve Removal
- On-board Refueling Vapor Recovery (ORVR) valve Installation
- Fuel Filler Cap Description
- Fuel Tank Air Filter Removal
- Fuel Tank Air Filter Installation
Positive Crankcase Ventilation (PCV) Valve Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)
...
Description
The Evaporative Emission Control System prevents fuel vapor stored in
fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the
fuel tank, the vapor passes through vent h ...
See also:
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Installation
1.
Install in the reverse order of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
...
Console Armrest Component Location
1. Console armrest
...
Copyright © www.kifomanual.com 2014-2024