(4Door, 2Door) |
1. |
After loosening the trunk lid hinge (A) mounting bolt, adjust
the trunk lid by moving it up or down, or right or left.
|
2. |
Adjust the trunk lid height by turning the trunk lid overslam
bumpers (B).
|
3. |
After loosening the trunk lid striker (C) mounting bolts, adjust
the trunk lid striker by moving it up or down, or right or left.
|
Removal
Back View Camera
1.
Disconnect the negative(-) battery terminal.
2.
Open the trunk and remove the trunk lid trim.
(Refer to Body - & ...
Control Shaft Complete Installation
1.
Install in the reverse order of removal.
•
...
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...