Kia Forte: Rear Wheel Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the rear tire.

2.	After loosening the mounting clips and screws, then remove the rear wheel guard (A).

3.

Install in the reverse order of removal.

•	Replace any damaged clips.

Front Wheel Guard Replacement

• Put on gloves to protect your hands. &n ...

Front Mud Guard Replacement

• Put on gloves to protect your hands. &nb ...

See also:

ETC (Electronic Throttle Control) System Specification
Throttle angle (°) Output voltage (V) [Vref = 5.0V] TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 20 1.41 ...

Immobilizer system (if equipped)
Your vehicle may be equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignit ...

Circuit Diagram - ESC (2)
...

Categories

Copyright © www.kifomanual.com 2014-2024