Kia Forte: Specification - Keyless Entry And Burglar Alarm - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Specification

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Specification

Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ 140°F)
RF Modulation
FSK
LF Modulation
ASK
RF frequency
315 MHz
Battery
CR2032
Transmissible distance
10m or more
Life of battery
2 years or more(at 20 times per day)
Button number
4
Function
Door lock
Door unlock
Trunk lid open
Panic

Keyless Entry And Burglar Alarm
...

Component Location
1. Hood switch 2. Burglar horn 3. BCM and RF antenna 4. Key warning switch 5. Front door switch 6. Front door lock actuator & switch 7. Rear door lock actuator &am ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description
Overdrive Clutch(OD/C) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Overdrive Clutch(OD/C) ...

DC/DC Converter Circuit Diagram
   In the ISG mode, if the power of an audio system turnsOFF by drawdown while “Auto Starting” or “Idle Starting”functi ...

Troubleshooting
Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignitio ...

Copyright © www.kifomanual.com 2014-2024