1. |
Disconnect the power door mirror switch module connector from
front door trip panel.
|
2. |
Check for the continuity between terminals of power door mirror
switch according to the table.
[Power Door Mirror Switch]
[Power Folding Mirror Switch]
|
Description
Component location : Manual transaxle
case
Operation principle : Back up lamp
switch is pushed by the reverse lug sliding when select arm, and switches the
back up lamp.
Funct ...
Crankshaft Position Sensor (CKPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A) ...
Antenna Inspection
Glass Antenna Test
1.
Wrap aluminum foil (A) around the tip of the tester probe (B)
as shown.
2.
Touch one tester probe to the ...