1. |
It will be able to diagnose defects of power window with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and self diagnosis.
|
2. |
Select model and "BCM".
|
3. |
Select the "SJB" to check.
|
4. |
Select "Current data", if you will check current data of power
window system. It provides input/output status of SJB.
|
5. |
If you will check the power door lock operation forcefully, select
"Actuation test".
|
Component Location
[Engine Room]
1. Receiver Drier
2. Condenser
3. Ambient Temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Assembly
7. Servic ...
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the mul ...
Radiator Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and
then install it on a pressure tester.
2.
...