Kia Forte: Ambient Temperature Sensor Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Ambient Temperature Sensor Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the engine room under cover front panel (A).
|
| 3. |
Disconnect the connector and then remove the ambient temperature
sensor (A).
|
| 4. |
Install in the reverse order of removal.
|
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambie ...
Cluster Ionizer Description
The cluster ionizer helps clean odor in the vehicle or from the air-conditioner
system.
When the ignition switch is ON, the inoizer runs a "CLEAN" mode and then
a "ION" ...
See also:
Driving your vehicle
Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change
the oil or for any other purpose. If you hear a change in the sound of the exh ...
Specification
Item
Specification
Ultrasonic sensor
Voltage rating
DC 12 V
Detecting range
30 cm ~ 120 cm
Operation voltage
DC 9 ~ 16 ...
Front Oil Seal Replacement
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
2.
Remove the front oil seal (A) ...
Copyright © www.kifomanual.com 2014-2025