Kia Forte: Drive Belt Removal - Timing System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Drive Belt Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Drive Belt Removal

1.
Remove the drive belt.
(1)
Loosen the alternator mounting bolts (A).
(2)
Loosen the tension by turning the tension adjusting bolt (B) counterclockwise.
(3)
Remove the drive belt (C).

Components
1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain tensioner arm 7. Timing chain tensioner 8. T ...

Drive Belt Inspection
1. Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.    ...

See also:

SS-B Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Daytime running light 
Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, and it is especially helpful aft ...

ECM Terminal And Input/Output signal (M/T)
ECM Terminal Function Connector [CNG-MA] Pin No. Description Connected to 1 Ignition Coil (Cylinder #1) control output Ignition Co ...

Copyright www.kifomanual.com 2014-2026