Kia Forte: Ignition Coil Removal

Ignition Coil Circuit Diagram

[M/T] [A/T] ...

Ignition Coil Installation

1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

See also:

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Output Speed Sensor Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Center Pillar Trim Replacement
[Center pillar lower trim] (4Door, 5Door)    • Put on gloves to protect your hand ...