Kia Forte: Evaporative Emission Control System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System
- Description
- Operation
- Schematic Diagram
- Components Location
- Inspection
- Canister Removal
- Canister Inspection
- Canister Installation
- On-board Refueling Vapor Recovery (ORVR) valve Removal
- On-board Refueling Vapor Recovery (ORVR) valve Installation
- Fuel Filler Cap Description
- Fuel Tank Air Filter Removal
- Fuel Tank Air Filter Installation
Positive Crankcase Ventilation (PCV) Valve Installation
1.
Installation is reverse of removal.
PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)
...
Description
The Evaporative Emission Control System prevents fuel vapor stored in
fuel tank from vaporizing into the atmosphere. When the fuel evaporates in the
fuel tank, the vapor passes through vent h ...
See also:
SS-A Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...
Windshield Wiper-Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Wiper Switch
Washer Switch
...
Copyright © www.kifomanual.com 2014-2025