Kia Forte: Specifications
| Fuel Delivery System |
| Items |
Specification |
|
| Fuel Tank |
Capacity |
50 lit. (13.2 U.S.gal., 52.8 U.S.qt., 44.0 Imp.qt.) |
| Fuel Filter |
Type |
Paper type |
| Fuel Pressure Regulator |
Regulated Fuel Pressure |
323 ~ 363 kPa (3.3 ~ 3.7 kgf/cm², 46.9 ~ 52.6 psi) |
| Fuel Pump |
Type |
Electrical, in-tank type |
| Driven by |
Electric motor |
|
| Sensors |
Manifold Absolute Pressure Sensor (MAPS)
▷ Type: Piezo-resistive pressure sensor type
▷ Specification
| Pressure [kPa (kgf/cm², psi)] |
Output Voltage (V) |
| 20.0 (0.20, 2.9) |
0.79 |
| 46.7 (0.47, 6.77) |
1.84 |
| 101.3 (1.03, 14.7) |
4.0 |
Intake Air Temperature Sensor (IATS)
▷ Type: Thermistor type
▷ Specification
| Temperature [°C(°F)] |
Resistance (kΩ) |
| -40(-40) |
40.93 ~ 48.35 |
| -20(-4) |
13.89 ~ 16.03 |
| 0(32) |
5.38 ~ 6.09 |
| 10(50) |
3.48 ~ 3.90 |
| 20(68) |
2.31 ~ 2.57 |
| 40(104) |
1.08 ~ 1.21 |
| 50(122) |
0.76 ~ 0.85 |
| 60(140) |
0.54 ~ 0.62 |
| 80(176) |
0.29 ~ 0.34 |
Engine Coolant Temperature Sensor (ECTS)
▷ Type: Thermistor type
▷ Specification
| Temperature [°C(°F)] |
Resistance (kΩ) |
| -40(-40) |
48.14 |
| -20(-4) |
14.13 ~ 16.83 |
| 0(32) |
5.79 |
| 20(68) |
2.31 ~ 2.59 |
| 40(104) |
1.15 |
| 60(140) |
0.59 |
| 80(176) |
0.32 |
Throttle Position Sensor (TPS) [ integrated into ETC module]
▷ Type : Hall IC Non-contact sensor type
▷ Specification
| Throttle angle (°) |
Output voltage (V) [Vref = 5.0V] |
|
| TPS1 |
TPS2 |
|
| 0 |
0.5 |
4.5 |
| 10 |
0.96 |
4.05 |
| 20 |
1.41 |
3.59 |
| 30 |
1.87 |
3.14 |
| 40 |
2.32 |
2.68 |
| 50 |
2.78 |
2.23 |
| 60 |
3.23 |
1.77 |
| 70 |
3.69 |
1.32 |
| 80 |
4.14 |
0.86 |
| 90 |
4.6 |
0.41 |
| 98 |
4.65 |
0.35 |
| C.T (0) |
0.5 |
4.5 |
| W.O.T (86) |
4.41 |
0.59 |
Crankshaft Position Sensor (CKPS)
▷ Type: Magnetic field sensitive Type
| Item |
Specification |
| Coil Resistance (Ω) |
774 ~ 946 [20°C (68°F)] |
Camshaft Position Sensor (CMPS)
▷ Type: Hall effect type
Knock Sensor (KS)
▷ Type: Piezo-electricity type
▷ Specification
| Item |
Specification |
| Capacitance (pF) |
850 ~ 1,150 |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]
▷ Type: Zirconia (ZrO2) [Linear] type
▷ Specification
| Item |
Specification |
| Heater Resistance (Ω) |
2.4 ~ 4.0 [20°C(69.8°F)] |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
▷ Type: Zirconia (ZrO2) [Binary] type
▷ Specification
| A/F Ratio (λ) |
Output Voltage(V) |
| RICH |
0.6 ~ 1.0 |
| LEAN |
0 ~ 0.4 |
| Item |
Specification |
| Heater Resistance (Ω) |
Approx. 9.0 [20°C(68°F)] |
Accelerator Position Sensor (APS)
▷ Type: Variable resistor type
▷ Specification
| Accelerator Position |
Output Voltage (V) |
|
| APS1 |
APS2 |
|
| C.T |
0.7 ~ 0.8 |
0.29 ~ 0.46 |
| W.O.T |
3.85 ~ 4.35 |
1.93 ~ 2.18 |
Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo - Resistivity type
▷ Specification
| Pressure [kPa (kgf/cm², in H2O) |
Output Voltage (V) |
| -6.67 (-0.068, -26.8) |
0.5 |
| 0 |
2.5 |
| +6.67 (0.068, 26.8) |
4.5 |
| Actuators |
Injector
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
13.8 ~ 15.2 [20°C(68°F)] |
ETC Motor [integrated into ETC Module]
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
0.3 ~ 100 [20°C(68°F)] |
Purge Control Solenoid Valve (PCSV)
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
22.0 ~ 26.0 [20°C(68°F)] |
CVVT Oil Control Valve (OCV)
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
9.4~10.4 [20°C(68°F)] |
Variable Intake Solenoid (VIS) Valve
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
30.0 ~ 35.0 [20°C(68°F)] |
Variable Charge Motion Actuator (VCMA)
▷ Specification
[Motor]
| Item |
Specification |
| Coil Resistance (Ω) |
3.4 ~ 4.4 [20°C(68°F)] |
[Position Sensor]
| Item |
Specification |
| Coil Resistance (kΩ) |
3.44 ~ 5.16 [20°C(68°F)] |
Ignition Coil
▷ Type: Stick type
▷ Specification
| Item |
Specification |
| Primary Coil Resistance (Ω) |
0.75 ± 15％ [20°C(68°F)] |
| Secondary Coil Resistance (kΩ) |
5.9 ± 15％ [20°C(68°F)] |
Canister Close Valve (CCV)
▷ Specification
| Item |
Specification |
| Coil Resistance (Ω) |
19.5 ~ 22.5 [20°C(68°F)] |
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 5 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
640 ± 100
D-range
...
See also:
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration,
and repl ...
Before driving
Before entering vehicle
Be sure that all windows, outside mirror(s), and outside lights are clean.
Check the condition of the tires.
Check under the vehicle for any sign of leaks.
Be sure th ...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the k ...
Copyright © www.kifomanual.com 2014-2025