Kia Forte: Fuel Sender Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Sender Removal
| 1. |
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")
|
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
| 3. |
Remove the fuel sender (A) in the direction of an arrow.
|
Fuel Pump Motor Installation
1.
Install in the reverse order of removal.
...
Fuel Sender Installation
1.
Install in the reverse order of removal.
...
See also:
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
Rear Door Module Component Location
(4Door, 5Door)
1. Rear door module
...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable t ...
Copyright © www.kifomanual.com 2014-2025