Kia Forte: Replacement - Manual Transaxle Fluid - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Fluid / Replacement

1.
Uplift the vehicle with lift.
2.
Drain the manual transaxle oil after loosening the drain plug (A).

3.
Install the drain plug with new gasket.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)

4.
Loosen the oil filler plug (A).

5.
Add new oil through the filler plug hole and, fill it just below the plug opening.

Standard oil: SAE 75W/85, API GL-4
Oil capacity: 1.9 ~ 2.0 L (0.50 ~ 0.53 U.S.gal., 2.01 ~ 2.11 U.S. qt., 1.67 ~ 1.76 lmp qt.)

6.
Install the oil filler plug.

Tightening torque:
58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)

Inspection
1. Uplift the vehicle with lift. 2. Loosen the oil filler plug (A). 3. Check the oil level. ...

Manual Transaxle
...

See also:

Purge Control Solenoid Valve (PCSV) Specification
Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

Dynamic Damper Replacement
1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

Replacement
1. Remove the cap (A) and remove the nuts, then remove the wiper arm (B). Tightening torque : 22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 ...

Copyright © www.kifomanual.com 2014-2026