Kia Forte: Shift Lever Removal - Manual Transaxle Control System - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Lever Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Shift Lever Removal

1.
Remove the floor Interior console assembly.
(Refer to Body - " Floor Console")
2.
Remove the cover (A).

3.
Remove the select cable (B) by removing the snap pin (A).

4.
Remove the shift cable (B) after removing the clip (A).

5.
Remove the cable socket (A) from lever assembly after pulling the cable socket clip in the direction of the arrow.

6.
Remove the shift lever assembly (B) by removing the bolts (A-4ea).

Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

7.
Remove the boots (A) and knob (B) from the lever assembly.
  
Rotating counter-clockwise shift lever knob (B).

Shift Lever Components
1. Shift lever knob 2. Shift lever assembly 3. Shift cable assembly 4. Select cable assembly 5. Retainer ...

Shift Lever Installation
1. Install in the reverse order of removal.    • ...

See also:

DC/DC Converter Operation Principle
   • In the ISG mode, if the power of an audio system turns OFF by drawdown while “Auto ...

Variable Charge Motion Actuator (VCMA) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the VCMA connector (A). ...

Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses ...

Copyright © www.kifomanual.com 2014-2025