Kia Forte: Control Cable Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Cable Inspection
| 1. |
Check the select cable for proper operation and for damage.
|
| 2. |
Check the shift cable for proper operation and for damage.
|
| 3. |
Check the boots for damage.
|
| 4. |
Check the boots for wear abrasion sticking, restricted movement
or damage.
|
Control Cable Components
1. Shift lever knob
2. Shift lever assembly
3. Shift cable assembly
4. Select cable assembly
5. Retainer
...
Control Cable Removal
1.
Remove the floor console assembly.
(Refer to Body - " Floor Console")
2.
Remove the select cable (B) by removing the snap ...
See also:
Condenser Replacement
1.
Recover the refrigerant with a recovery/ recycling/ charging station.
2.
Disconnect the negative (-) battery terminal.
3 ...
Manifold Absolute Pressure Sensor (MAPS) Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Conditio ...
Component Location
1. Driver power window main switch
2. Passenger power window switch
3. Front window motor
4. Rear window motor
5. Rear window switch
...
Copyright © www.kifomanual.com 2014-2025