Kia Forte: Components Location
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System / Components Location
| 1. Radiator 2. Mounting insulator 3. Valve body cover |
4. Oil cooler tube 5. Automatic transaxle 6. Radiator upper mounting bracket |
| 1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly |
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves). The oil pump is powered by the engine.
Automatic Transaxle Fluid (ATF) passes ...
Oil Cooler Components
1. Radiator
2. Radiator upper mounting bracket
3. Lower mounting insulator
4. Radiator upper hose
5. Filler neck assembly
6. Radiator lower hose
7. Clamp
...
See also:
Front Hub / Knuckle Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...
In-car Sensor (DATC only) Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
Relay Box (Passenger Compartment) Installation
1.
Install the smart junction box.
2.
Install the crash pad lower panel.
3.
Check that all system operates norm ...
Copyright © www.kifomanual.com 2014-2025