1. Radiator 2. Radiator upper mounting bracket 3. Lower mounting insulator 4. Radiator upper hose |
5. Filler neck assembly 6. Radiator lower hose 7. Clamp |
Air Cleaner Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Remove the air duct (A).
...
In-car Sensor (DATC only) Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignitio ...