Kia Forte: SS-A Solenoid Valve(ON/OFF) Circuit Diagram

SS-A Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω ...

SS-A Solenoid Valve(ON/OFF) Inspection

1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Installation
   • Install the concentric slave cylinder bolts. Not to be bent or twisted, Tighten them i ...

Front Hub / Knuckle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the F ...