Kia Forte: Shift Cable Adjustment - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Shift Cable Adjustment

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Adjustment

1.
Place the shift lever in the interior, and the transmission manual control lever, to the N position.
2.
Connect the shift lever (B) in the interior with the shift cable (A).

3.
Lightly push the shift cable towards "F" to tighten the cable.
4.
Tighten the nut (A) to the specified torque.

Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.8 lb-ft)

Shift Cable Installation
1. Install in the reverse order of removal.    • ...

Driveshaft and axle
...

See also:

Removal
Back View Camera 1. Disconnect the negative(-) battery terminal. 2. Open the trunk and remove the trunk lid trim. (Refer to Body - & ...

Radiator Grill Component Location
(4Door) 1. Radiator grill (5Door, 2Door) 1. Radiator grill ...

CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Copyright www.kifomanual.com 2014-2026