Kia Forte: Operation
1. |
General Function
A. |
Auto-learn takes place only once per Ignition cycle.
|
B. |
On successful completion, 4 road wheel sensor ID's are
latched into memory for monitoring.
|
C. |
Until Auto-learn completes, previously learned sensors
are monitored for under inflation / leak warnings.
|
|
2. |
General Conditions to Learn New Sensors:
A. |
Receiver must determine that it is confident that sensor
is not temporary:
|
2) |
Uses confidence reduction of previously learned
sensors.
|
|
B. |
Typical time at driving continuously over 15.5 mph(25
kph) to learn a new sensor is up to 20 minutes.
|
|
3. |
General Conditions to Un-Learn a sensor that is removed:
A. |
It takes less than 20 minutes at 15.5 mph(25 mph).
|
B. |
Confidence reduction is dependent on time which vehicle
is driven at speed greater than or equal to 12.4 mph(20 kph).
|
|
1.
Mode
(1)
Virgin State
A.
The receiver as a sole part is shipped in this
state. ...
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
See also:
Heated Oxygen Sensor (HO2S) Specification
HO2S [Bank 1/Sensor 1] (Linear type)
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2] (Binary type)
...
Explanation of scheduled maintenance items
Engine oil and filter
The engine oil and filter should be changed at the intervals specified in the
maintenance schedule. If the car is being driven in severe conditions, more frequent
oil and filt ...
Photo Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of the defros ...