1. |
Loosen the screw (A-3ea) and then remove the lower cover (B) from
the steering wheel body.
|
2. |
Remove the garnish (A).
|
3. |
Remove the wiring (A).
|
4. |
Loosen the screw (A-6ea) and then remote control switch assembly
(B) from the garnish.
|
5. |
Installation is the reverse of the removal.
|
Oil Pump Components
1. Inner roter
2. Outer roter
3. Oil pump cover
4. Relief plunger
5. Relief spring
6. Relief plug
7. O-ring (suction side)
8. O-ring (discharge side)
...
Auto Head Lamp Leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Sensor angle change.
3.
...
Severe driving conditions
A- Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature
or less than 10 miles (16 km) in freezing temperature
B- Extensive engine idling or low speed driving for long ...