1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove box housing")
|
3. |
Disconnect the passenger airbag connector (A) and remove the PAB
mounting bolts (B).
|
4. |
Remove the crash pad.
(Refer to Body - "Main crash pad assembly")
|
5. |
Remove the mounting bolts from the crash pad. Then remove the
passenger airbag.
|
High Mounted Stop Lamp Installation
[2 Door]
1.
Install the high mounted stop lamp assembly.
2.
Install the roof trim assembly.
[4 Door]
1.
...
DC/DC Converter Operation Principle
•
In the ISG mode, if the power of an audio system turns
OFF by drawdown while “Auto ...
Installation
1.
Install in the reverse order of removal.
2.
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring t ...