Kia Forte: Front Door Outside Handle Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Outside Handle Replacement

(4Door, 5Door, 2Door)

1.	Remove the front door module. (Refer to Front Door - "Front Door Module")

2.	Disconnect the front door outside handle connector (A).

3.	Remove the hole plug (B).

4.

After loosening the mounting bolt, then remove the front door outside handle cover (A).

Tightening torque :

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

5.	Remove the front door outside handle (A) by sliding it rearward.

6.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Make sure the door locks/unlocks and opens/closes properly.

Front Door Outside Handle Component Location

(4Door, 5Door, 2Door) 1. Front door outside handle ...

Front Door Latch Component Location

(4Door, 5Door, 2Door) 1. Front door latch ...

See also:

IMS Power Seat Control Inspection
1. Disconnect the IMS control switch connector. 2. With the power IMS control switch in each position, make sure that continuity ex ...

Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash. The SRSCM determines if and when to deploy the PAB. ...

Description
Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the ...

Categories

Copyright © www.kifomanual.com 2014-2024