(4Door, 5Door) |
1. |
Loosen the front door checker (B) mounting bolt.
|
2. |
Detach the clips, then remove the front door side weatherstrip
(A).
|
3. |
Install in the reverse order of removal.
|
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
2. |
Loosen the front door checker (B) mounting bolt.
|
3. |
Detach the clips, then remove the front door side weatherstrip
(A).
|
4. |
Install in the reverse order of removal.
|
Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...
Checking the brake/clutch fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir cap and adding brake/clutch* ...
Valve Body Components Location
1. Pressure Controle Valve(PCV) adjust screw
2. Solenoid valve
3. Oil temperature sensor
4. Accumulator
5. Low & Reverse Brake(LR/B) pressure flow hole
6. Underdrive ...