Kia Forte: Front Seat Belt Pretensioner Replacement - Front Seat Belt - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Seat Belt Pretensioner Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Pretensioner Replacement

(4Door, 5Door)
  
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
2.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolt, then remove the front seat belt pretensioner (B).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
Make sure the connector is plugged in properly.
Replace any damaged clips.
Front Seat Belt Pretensioner Component Location
(4Door, 5Door) 1. Front seat belt pretensioner ...

Height Adjust Component Location
(4Door, 5Door) 1. Height adjust ...

See also:

Installation
1. Install in the reverse order of removal.    Apply the specified grease to ...

Oil Pressure Switch Removal and Installation
1. Disconnect the oil pressure switch connector (A) and then remove the oil pressure switch (B). Tightening torque : 9.8 ~ 11.8N.m (1 ...

General Troubleshooting Information
Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and cl ...

Copyright © www.kifomanual.com 2014-2024