Kia Forte: Fuel Tank Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Tank Installation
| 1. |
Install in the reverse order of removal.
|
Fuel Tank Removal
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...
See also:
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from
releasing into the atmosphere. This system recy ...
Component Location
1. Audio unit
2. Tweeter speaker
3. Antenna cable connector
4. Glass antenna amplifier (Radio)
5. Front door speaker
6. Rear door speaker
7. Antenna feeder cable
8. ...
Copyright © www.kifomanual.com 2014-2025