Kia Forte: Garment Hook Replacement - Roof Trim - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Garment Hook Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Roof Trim / Garment Hook Replacement

(2Door)
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the cap (B) and bolt, then remove the garment hook (A).

2.
Install in the reverse order of removal.
Garment Hook Components
(2Door) 1. Garment hook ...

Roof Trim Assembly Component Location
1. Roof Trim Assembly ...

See also:

Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, ...

Engine And Transaxle Assembly Installation
Installation is in the reverse order of removal. Perform the following : • Adjust shift cable. • Adjust throttle cable. ...

Drive plate Components
1. Adapter plate 2. Drive plate ...

Copyright www.kifomanual.com 2014-2025