Kia Forte: Height Adjust Replacement - Front Seat Belt - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Height Adjust Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Seat Belt / Height Adjust Replacement

(4Door, 5Door)
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, then remove the height adjust (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Height Adjust Component Location
(4Door, 5Door) 1. Height adjust ...

Front Seat Belt Buckle  Component Location
1. Front seat belt buckle ...

See also:

Injector Inspection
1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the inject ...

CVVT Oil Control Valve (OCV) Circuit Diagram
(M/T) (A/T) ...

PTC Heater Inspection
Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode ...

Copyright www.kifomanual.com 2014-2026