(5Door) |
|
|
1. |
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
|
2. |
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
|
3. |
After loosening the mounting clips and screw, then remove the
luggage side trim (A).
|
4. |
Disconnect the luggage lamp connector (A).
|
5. |
Install in the reverse order of removal.
|
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Camshaft Position Sensor (CMPS) Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification:
Refer to “Wave Form”
...
Removal
1.
Separate the push rod (C) after remove the pin (A) and washer
(B).
2.
Remove the battery.
(Refer to Engine Electrical S ...