Kia Forte: Oil Pump Description

The oil pump is built-in as a single unit with the 26 Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Oil Cooler Inspection

Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. ...

Oil Pump Components

1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10. Bo ...

See also:

AGM Battery Specification
Item Specification Model type AGM 70L-DIN Capa ticy [20HR / 5HR] (AH) 70/56 Cold Cranking Amperage (A) 760 (SAE) / 610 (EN) ...

In-car Sensor (DATC only) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia panel. (Refer to Body - "Center Fascia Panel") ...

Accelerator Position Sensor (APS) Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...