Kia Forte: Operation - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Operation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Operation

1.
Vehicle moving.
2.
The transmission lever position is D-range. The brake pedal is released.
3.
The engine is running. (Vehicle moving).
4.
The driver brakes until the vehicle comes to a standstill.
5.
The transmission lever position is D-range. The brake pedal is pressed
6.
The engine stops. The symbol "AUTO STOP" lights up in the instrument cluster.
7.
The driver wants to continue the journey.
8.
The transmission lever position is D-range. The brake pedal is released.
9.
The engine is running again. The symbol goes out.
Description
Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill if the and starts it again as soon as the brake pedal is released. This not only reduce ...

Operation Condition for the ISG function
1. Auto stop or Auto start condition (If all of the below condition are satisfied) Items State Remark Driving conditions ISG OFF Switch ...

See also:

Audio Remote Control Inspection
1. Check for resistance between terminals in each switch position. [Audio (LH)] Switch Connector terminal Resista ...

Steering Column and Shaft Inspection
1. Check the steering column for damage and deformation. 2. Check the joint bearing for damage and wear. 3. Che ...

Drive plate Components
1.  Piston ring 2.  Snap ring 3.  Piston pin 4.  Piston 5.  Connecting rod 6.  Connecting rod upper bearing 7.  Connecting rod lower be ...

Copyright © www.kifomanual.com 2014-2024