Kia Forte: Output Speed Sensor Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(1.1 ~ 1.55) 0.043 ~ 0.061 |
|
| Output voltage |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...
See also:
Temperature Control Actuator Replacement
[Driver's side]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body -& ...
Valve Body Installation
1.
Install in the reverse order of removal.
After replacement or reinstallation procedure of ...
Overhead Console Lamp Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
...
Copyright © www.kifomanual.com 2014-2025