Kia Forte: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications

Direct control VFS[OD/C]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description
Overdrive Clutch(OD/C) Control Solenoid Valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Overdrive Clutch(OD/C) ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Circuit Diagram
...

See also:

Heater & A/C Control Unit (Manual) Replacement
1. Remove the audio unit. (Refer to Body Electrical System - "Audio Unit") 2. After loosening the mounting screws, remove the ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Installation
   Be sure to install the harness wires so they will not pinch or interfere with other parts. ...

Copyright © www.kifomanual.com 2014-2025