Kia Forte: Rear Center Seat Belt Retractor Replacement
•
|
When installing the belt, make sure not to damage the
retractor.
|
|
1. |
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray Trim")
|
2. |
After loosening the mounting bolt, then remove the rear center
seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(5Door)
•
|
When installing the belt, make sure not to damage the
retractor.
|
|
1. |
Remove the rear seat back cover [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
2. |
After loosening the mounting nut, then remove the rear center
seat belt retractor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(4Door)
1. Rear center seat belt retractor
(5Door)
1. Rear center seat belt retractor
...
(4Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt buckle [RH]
(5Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt bu ...
See also:
Cooling Fan Description
[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module
(ECM) controls the cooling fan according to the coolant temperature, vehicle
speed and A ...
Fuel Sender Installation
1.
Install in the reverse order of removal.
...
Specifications
AVN Head Unit
Item
Specification
Power supply
DC 14.4V negative ground
Load Impedance
4ohm × 4
Tuning type
PLL SYNTH ...